Cache Efficiency Monitor - Statuslines

Features

• Real-time prompt cache hit rate tracking (percentage of tokens read from cache)
• Cache write efficiency monitoring (cache creation vs regular input ratio)
• Cost savings estimation based on 90% cache read discount
• Visual hit rate bar (20-char progress indicator, each █ = 5%)
• Efficiency scoring (excellent >50%, good 25-50%, low 1-25%, none 0%)
• Optimization recommendations (enable caching, increase reuse patterns)
• Color-coded status (green excellent, yellow good, orange low, gray none)
• Lightweight bash with bc for percentage calculations

Use Cases

• Optimizing prompt caching strategy to reduce API costs
• Identifying inefficient cache usage patterns (high writes, low reads)
• Validating that prompt caching is properly enabled and working
• Tracking cost savings from cache utilization
• Debugging cache misses in long coding sessions
• Comparing caching efficiency across different projects/workflows

Requirements

• Claude Code CLI installed and configured
• Bash shell available (bash 4.0+ recommended for arithmetic operations)
• jq command-line JSON processor (jq 1.6+ recommended for safe extraction with // defaults)
• bc calculator (bc 1.07+ optional for precise savings calculations, script falls back to integer math)
• Terminal with ANSI color code support (256-color mode recommended for color-coded efficiency indicators)
• Claude Code version with cache metrics support (cache_read_input_tokens, cache_creation_input_tokens fields in JSON)

Configuration

{
  "statusLine": {
    "type": "command",
    "command": "$CLAUDE_PROJECT_DIR/.claude/statuslines/cache-efficiency-monitor.sh",
    "refreshInterval": 2000
  }
}

Examples

Enhanced Cache Monitor with Write Efficiency Tracking

Extended version with detailed write efficiency metrics and recommendations

#!/usr/bin/env bash

# Enhanced Cache Efficiency Monitor with Write Efficiency

input=$(cat)

cache_read_tokens=$(echo "$input" | jq -r '.cost.cache_read_input_tokens // 0')
cache_create_tokens=$(echo "$input" | jq -r '.cost.cache_creation_input_tokens // 0')
regular_input_tokens=$(echo "$input" | jq -r '.cost.input_tokens // 0')

total_input=$((cache_read_tokens + cache_create_tokens + regular_input_tokens))

if [ $total_input -eq 0 ]; then
  total_input=1
fi

cache_hit_rate=$((cache_read_tokens > 0 ? (cache_read_tokens * 100) / total_input : 0))
write_percentage=$((cache_create_tokens > 0 ? (cache_create_tokens * 100) / total_input : 0))

if [ $cache_hit_rate -ge 50 ]; then
  CACHE_COLOR="\033[38;5;46m"
  CACHE_ICON="✓"
elif [ $cache_hit_rate -ge 25 ]; then
  CACHE_COLOR="\033[38;5;226m"
  CACHE_ICON="●"
elif [ $cache_hit_rate -gt 0 ]; then
  CACHE_COLOR="\033[38;5;208m"
  CACHE_ICON="⚠"
else
  CACHE_COLOR="\033[38;5;250m"
  CACHE_ICON="○"
fi

if [ $cache_read_tokens -gt 0 ]; then
  savings_tokens=$(echo "scale=0; $cache_read_tokens * 0.9 / 1" | bc 2>/dev/null || echo "$((cache_read_tokens * 9 / 10))")
  savings_display="💰 ~${savings_tokens} tok saved"
else
  savings_display=""
fi

hit_bar_filled=$((cache_hit_rate / 5))
hit_bar_empty=$((20 - hit_bar_filled))

if [ $hit_bar_filled -gt 0 ]; then
  hit_bar=$(printf "█%.0s" $(seq 1 $hit_bar_filled))$(printf "░%.0s" $(seq 1 $hit_bar_empty))
else
  hit_bar="░░░░░░░░░░░░░░░░░░░░"
fi

# Enhanced recommendations
if [ $cache_hit_rate -eq 0 ] && [ $cache_create_tokens -eq 0 ]; then
  RECOMMENDATION="(Enable caching?)"
elif [ $cache_hit_rate -lt 25 ] && [ $write_percentage -gt 50 ]; then
  RECOMMENDATION="(More reads needed - ${write_percentage}% writes)"
elif [ $write_percentage -gt 75 ]; then
  RECOMMENDATION="(Too many cache writes)"
else
  RECOMMENDATION=""
fi

RESET="\033[0m"

if [ -n "$savings_display" ]; then
  echo -e "${CACHE_ICON} Cache: ${CACHE_COLOR}${hit_bar}${RESET} ${cache_hit_rate}% | Write: ${write_percentage}% | ${savings_display} ${RECOMMENDATION}"
else
  echo -e "${CACHE_ICON} Cache: ${CACHE_COLOR}${hit_bar}${RESET} ${cache_hit_rate}% | Write: ${write_percentage}% ${RECOMMENDATION}"
fi

Cache Monitor with Custom Efficiency Thresholds

Configurable efficiency thresholds for different caching strategies

#!/usr/bin/env bash

# Cache Efficiency Monitor with Custom Thresholds

EXCELLENT_THRESHOLD=${CACHE_EXCELLENT_THRESHOLD:-50}
GOOD_THRESHOLD=${CACHE_GOOD_THRESHOLD:-25}

input=$(cat)

cache_read_tokens=$(echo "$input" | jq -r '.cost.cache_read_input_tokens // 0')
cache_create_tokens=$(echo "$input" | jq -r '.cost.cache_creation_input_tokens // 0')
regular_input_tokens=$(echo "$input" | jq -r '.cost.input_tokens // 0')

total_input=$((cache_read_tokens + cache_create_tokens + regular_input_tokens))

if [ $total_input -eq 0 ]; then
  total_input=1
fi

cache_hit_rate=$((cache_read_tokens > 0 ? (cache_read_tokens * 100) / total_input : 0))
write_percentage=$((cache_create_tokens > 0 ? (cache_create_tokens * 100) / total_input : 0))

# Custom thresholds
if [ $cache_hit_rate -ge $EXCELLENT_THRESHOLD ]; then
  CACHE_COLOR="\033[38;5;46m"
  CACHE_ICON="✓"
elif [ $cache_hit_rate -ge $GOOD_THRESHOLD ]; then
  CACHE_COLOR="\033[38;5;226m"
  CACHE_ICON="●"
elif [ $cache_hit_rate -gt 0 ]; then
  CACHE_COLOR="\033[38;5;208m"
  CACHE_ICON="⚠"
else
  CACHE_COLOR="\033[38;5;250m"
  CACHE_ICON="○"
fi

if [ $cache_read_tokens -gt 0 ]; then
  savings_tokens=$(echo "scale=0; $cache_read_tokens * 0.9 / 1" | bc 2>/dev/null || echo "$((cache_read_tokens * 9 / 10))")
  savings_display="💰 ~${savings_tokens} tok saved"
else
  savings_display=""
fi

hit_bar_filled=$((cache_hit_rate / 5))
hit_bar_empty=$((20 - hit_bar_filled))

if [ $hit_bar_filled -gt 0 ]; then
  hit_bar=$(printf "█%.0s" $(seq 1 $hit_bar_filled))$(printf "░%.0s" $(seq 1 $hit_bar_empty))
else
  hit_bar="░░░░░░░░░░░░░░░░░░░░"
fi

RESET="\033[0m"

if [ -n "$savings_display" ]; then
  echo -e "${CACHE_ICON} Cache: ${CACHE_COLOR}${hit_bar}${RESET} ${cache_hit_rate}% | ${savings_display}"
else
  echo -e "${CACHE_ICON} Cache: ${CACHE_COLOR}${hit_bar}${RESET} ${cache_hit_rate}%"
fi

Cache Efficiency Monitor Installation Example

Complete setup script with cache field verification

#!/bin/bash
# Installation script for Cache Efficiency Monitor

mkdir -p .claude/statuslines

# Check for bc (optional, for savings calculation)
if ! command -v bc &> /dev/null; then
  echo "Note: bc not found. Savings calculation will use integer math."
  echo "Install bc for precise calculations: brew install bc (macOS), apt install bc (Linux)"
fi

cat > .claude/statuslines/cache-efficiency-monitor.sh << 'SCRIPT_EOF'
#!/usr/bin/env bash
# Paste the full statusline script from the primary example above before running this installer.
SCRIPT_EOF

chmod +x .claude/statuslines/cache-efficiency-monitor.sh

# Add to settings.json
if [ ! -f .claude/settings.json ]; then
  echo '{"statusLine":{"type":"command","command":"$CLAUDE_PROJECT_DIR/.claude/statuslines/cache-efficiency-monitor.sh","refreshInterval":2000}}' > .claude/settings.json
else
  jq '.statusLine = {"type":"command","command":"$CLAUDE_PROJECT_DIR/.claude/statuslines/cache-efficiency-monitor.sh","refreshInterval":2000}' .claude/settings.json > .claude/settings.json.tmp
  mv .claude/settings.json.tmp .claude/settings.json
fi

echo "Cache Efficiency Monitor installed successfully!"
echo "Note: Requires Claude Code version with cache metrics support (cache_read_input_tokens, cache_creation_input_tokens)."
echo "Verify cache fields exist: echo '{"cost":{}}' | jq '.cost.cache_read_input_tokens'"

Troubleshooting

Cache hit rate always showing 0% despite caching enabled

Verify cache fields exist in JSON: echo '$input' | jq '.cost | {cache_read: .cache_read_input_tokens, cache_create: .cache_creation_input_tokens}'. If fields missing, Claude Code version may not expose cache metrics. Check official docs for required version. Caching requires Claude 3.5 Sonnet or Opus with prompt caching feature enabled. Verify prompt caching is configured in Claude Code settings.

Cost savings calculation showing unrealistic numbers

Script estimates savings using 90% discount formula (cache reads cost 10% of regular input). Verify cache*read_tokens value: echo '$input' | jq .cost.cache_read_input_tokens. Formula: savings = cache_read_tokens * 0.9. Adjust discount percentage in script if Claude pricing changes. Check bc calculation: echo 'scale=0; 1000 _ 0.9 / 1' | bc (should return 900).

Recommendation showing 'Enable caching?' when caching is on

Recommendation triggers when both cache_read_tokens and cache_create_tokens are 0. This means no cache activity detected. Verify prompt caching is configured in Claude Code settings. Check that prompts contain cacheable prefixes (system messages, long contexts). Short sessions may not benefit from caching. Verify cache fields are being read: echo '$input' | jq '.cost.cache_read_input_tokens'.

Hit rate bar not displaying correctly or showing as empty

Ensure terminal supports Unicode block characters (█ and ░). Test with: echo -e '█████░░░░░'. Bar uses hit_rate / 5 for scaling (each char = 5%). If hit_rate is 0, shows full empty bar (20x ░). Verify cache_hit_rate calculation: (cache_read_tokens * 100) / total_input. Check printf command works: printf '█%.0s' $(seq 1 5) (should show 5 blocks).

Write efficiency showing 'More reads needed' incorrectly

Recommendation appears when hit_rate <25% AND write_percentage >50% (creating more cache entries than using them). This indicates inefficient caching pattern. Solution: Reuse prompts more, reduce unique cache writes. Check if session involves many one-off queries vs repeated patterns. Verify write_percentage calculation: (cache_create_tokens * 100) / total_input.

Cache efficiency color always showing gray (NONE) even with cache activity

Check cache_hit_rate calculation: cache_hit_rate=$(( (cache_read_tokens * 100) / total_input )). Verify cache_read_tokens > 0: echo '$input' | jq .cost.cache_read_input_tokens. Ensure total_input includes all token types: total_input=$((cache_read_tokens + cache_create_tokens + regular_input_tokens)). Test threshold logic: if [ $cache_hit_rate -ge 50 ]; then echo "EXCELLENT"; fi.

Percentage calculations showing incorrect values (e.g., >100%)

Verify integer division is working correctly: echo $((100 * 50 / 100)) (should be 50). Check total_input > 0 before division. Test calculation: cache_hit_rate=$((cache_read_tokens * 100 / total_input)). Ensure values are numeric: echo "$cache_read_tokens" | grep -E '^[0-9]+$'. Check for integer overflow if values are very large. Verify total_input includes all components.

Savings display showing 'tok saved' with zero or missing value

Check cacheread_tokens > 0 before calculating savings. Verify bc calculation: echo 'scale=0; 1000 * 0.9 / 1' | bc (should return 900). If bc unavailable, script uses integer math: savingstokens=$((cache_read_tokens * 9 / 10)). Test: cache_read=1000; savings=$((cache_read * 9 / 10)); echo $savings (should be 900). Verify savings_display is set: if [ -n "$savings_display" ]; then echo "Has savings"; fi.

• Source repositorygithub.com 2026-07-18T07:31:52+00:00
• Documentationcode.claude.com